Polycom cx300 manual. Reading : Polycom Cx300 Desktop Phone Manuals 2019-03-07

Polycom cx300 manual Rating: 6,9/10 781 reviews

Reading : Polycom Cx300 Desktop Phone Manuals

polycom cx300 manual

To verify or configure Microsoft Office Communicator 2007 R2: 1. Voice mail may not be supported on your particular system. To take any other action, you must perform those actions on the Microsoft Office Communicator 2007 R2 client window. WĂ€hlen Sie auf dem Im GesprĂ€ch -Bildsc hirm MenĂŒ un. If this occurs, these objects should be removed before using the handset.

Next

Reading : Polycom Cx300 Desktop Phone Manuals

polycom cx300 manual

Restarting Your Phone On rare occasions, your phone may experience a problem that will require it to be restarted. The phone remembers the last language that was used by Microsoft Lync 2010 and uses English by default. When you hear a dial tone, enter the desired number. Ensure that the headset is properly connected. Any changes or modifications not expressly approved by Polycom could void the user's authority to operate this device. Warning: This equipment may become inoperable if electrical power fails or broadband internet access is interrupted. The computer, to which the phone is connected, is locked.

Next

POLYCOM CX600 USER MANUAL Pdf Download.

polycom cx300 manual

Hold Key —Holds an active call or resumes a held call. If you press 1, the volume key press response rate is saved. Select General tab, and under Language, select a language from the drop-down list. If there is an incoming call while you are in another call, pressing the Hold key puts the first call on hold and answers the second call. All other trademarks are property of their respective owners. Contact your system administrator to ensure your account is configured in Enterprise Voice mode. Las llamadas se pueden responder o realizar mediante Âź el telĂ©fono o la ventana del software de cliente Microsoft Office Communicator 2007 R2.

Next

Reading : Polycom Cx300 Desktop Phone Manuals

polycom cx300 manual

Placing Calls Before placing a call to contact, you may want to check their presence status in Microsoft Lync 2010. However, there is no guarantee that interference will not occur in a particular installation. The headset is not properly connected or turned on. To view call forwarding options: 1. Disclaimer Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to you. Speaker—For ringer and hands-free audio output. You are not signed into your Microsoft Lync client.

Next

Polycom CX300 Lync Phone

polycom cx300 manual

Note If you are off-hook dialing, press the Hold key to delete the entire phone number instead of pressing the Delete key multiple times. The display backlight is lit when: — You are in a call. When you hear a dial tone, enter the desired number. Replacement products or parts may be new or reconditioned. Depending on your needs, you should look for the document you need.

Next

POLYCOM CX300 USER MANUAL Pdf Download.

polycom cx300 manual

After you press the 5 dial pad key during startup, press 1 to continue with device settings, and then press 1 again to continue. Falls neue Nachrichten vorliegen, zeigt das Voicemail -Symbol eine Zahl an. The dial tone is long when the speaker is not streaming any sound. This could result in data corruption. Seleccione Herramientas, haga clic en Configurar audio y vĂ­deo. To listen to voice messages: 1. Advertisement Print version Many people prefer to read the documents not on the screen, but in the printed version.

Next

Polycom Manuals and User Guide PDF Section

polycom cx300 manual

If there are several calls on hold, you can cycle through the calls by pressing the Hold key. If you disconnect the phone from one computer and connect it to another computer that is running Microsoft Office Communicator 2007 R2, and then you press the Redial key, the phone will redial the last number called based on the information in the second computer. If dialing rules are set up for Microsoft Lync 2010, then these rules also apply to your phone. En este estado, sólo puede utilizar el teléfono como dispositivo de audio y no puede realizar n Summary of the content on the page No. The restart process will begin.

Next

Polycom CX 300 User Guide

polycom cx300 manual

Installation doit ĂȘtre exĂ©cutĂ©e conformĂ©ment Ă  tous les rĂšglements nationaux applicable au filage Ă©lectrique. The phone remembers the last language that was used by Microsoft Office Communicator 2007 R2 and uses English by default. Si el telĂ©fono ya se ha montado y conectado al ordenador, vaya directamente a Funciones del telĂ©fono en la pĂĄgina 1-5. Dial Pad—These 12 keys provide the 10 digits, the 26 alphabetic characters, and special characters available in context-sensitive applications. Contact your system administrator before doing so. Adjusting the Volume During a call, if you are using the speakerphone, pressing the Volume key adjusts the speaker volume. After you press the 5 dial pad key during startup, press 1 to continue with device settings, and then press 1 again to continue.

Next

Polycom CX3000 User Manual

polycom cx300 manual

Changing the Language Your phone supports all 38 languages that are supported by Multilingual User Interface Package of Microsoft Office Communicator 2007 R2 and mixed language display. Summary of the content on the page No. Operating Environment This device is rated as a commercial product for operation at +41ÂșF +5ÂșC to +95ÂșF +35ÂșC. The outlet to which this apparatus is connected must be installed near the equipment and must always be readily accessible. Please contact your Polycom Authorized Reseller for information about service agreements applicable to your product. Verify that the Multilingual User Interface Package for Microsoft Office Communicator 2007 R2 is installed on your computer.

Next