To print the failed Private Print job, submit the document again as a new Private Print job. Close the cover of the Bridge Unit. Remove the misfed paper from the right or left. Clearing paper misfeeds caused by a wrong paper size setting Paper misfeeds occur when there is a mismatch between the size of the paper in a drawer or the bypass tray and the one registered for the corresponding drawer or the bypass tray in the equipment. Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher. Contact your administrator to convert the archive file and try again.
Return the Saddle Stitch unit to its original position. TopAccess Message Corrective Action Cover Open - Please Close Cover. Paper misfeed in the drawer feeding portion Open the feeder cover on the right side. Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher. Press the button for the color you intend to replace.
Pull out the hole punch dust bin. Corrective Action If you cannot log into the equipment using client software, contact the administrator of the equipment. Corrective Action Improper settings may cause problems in locating the equipment in the network. Separate the finisher from the equipment. Clear the paper misfeed following the guidance shown on the touch panel.
The original is unsuited for the Check whether the original is suitable for the equipment. This chapter also describes the daily care for the equipment. Raise the two green levers. Replace both cartridges at a time. Turn the knob shown in the following figures to send the paper, and then remove the misfed paper. Remove the misfed paper inside the Bridge Unit.
Problem Description Cause Corrective Action Functions cannot be set. Close the front cover of the finisher. The print job is canceled. Place your hands on the near and far side of the lever and push to close the tray until it clicks. Try the 2503 problem job again. Press the drawer button indicated in the message.
Using the default settings also assures an easier network implementation, although you may be required to customize the settings to accommodate them in your particular environment. Paper unsuitable for the equipment is used. These codes help you specify the cause of an error you might encounter. Paper Feeding Cover Open - Please Close Cover. Put your fingers into A, push it up to release the lock and open the misfeed releasing cover.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. Paper misfeed in the automatic duplexing unit Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing unit. In other words, there are too many characters in the directory path. Be sure to securely close both sides of the misfeed releasing cover and of the automatic duplexing unit. After the transparent cover is lifted, remove the empty staple case.