Store it in a dry place and recharge it once a month. Be sure to keep your feet Could cause loss of control or a colli- firmly mounted on the footboards at all times. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. Now you can print a fresh page as and when you need to. All repair procedures in this 2005 Yamaha Raptor 350 factory service manual are arranged in sequential, step-by-stop order. To raise the beam, turn the adjusting bolt in di- rection a.
Test your brakes shallow water of up to a maximum of 35 cm after leaving water. Warm up the engine for several minutes, and then turn it off. Troubleshooting sections in this 2005 Yamaha Raptor 350 manual are provided in each appropriate chapter. If there is free play, have a Yamaha ating. Install and tighten the bolt. Re- pair as necessary for proper operation. This 2009 Yamaha Raptor 350 factory service manual includes procedures for part removal, disassembly and 2009 Yamaha Raptor 350 reassembly.
Turn the adjusting bolt until the throttle le- groove is almost in contact with the disc plate, ver free play is 2—4 mm 0. Install the oil filter cover by installing the the bolts, and then remove the oil filter el- bolts, and then tighten them to the speci- ement. Consult a Yamaha dealer if you 1. Clean the oil strainer and oil filter element Tightening torque: with solvent. If the engine oil is at or below the mini- The engine oil level should be checked before mum level mark, add sufficient oil of the each ride. Always shield eyes when working store it in a cool, dark place.
Remove the headlight bulb holder cover at the rear of the headlight by pulling it off. The 2005 Yamaha Raptor 350 manual is no different then a factory service manual you'd buy in stores. Always maintain proper tire pressure as described in this manual. You and then release the parking brake. The neutral indicator light should come on. You may damage the bat- tery.
Be sure that the engine has sufficiently ing the clutch lever too quickly. Dismount on the uphill side or to a side if pointed straight uphill. Practice turning at low speeds before attempting to turn at faster speeds. All repair procedures in this 2008 Yamaha Raptor 350 factory service manual are arranged in sequential, step-by-stop order. Remove the battery and charge it. The 2007 Yamaha Raptor 350 mechanic should carefully read and become familiar with the service procedures before beginning work. The data in this 2005 Yamaha Raptor 350 manual was compiled to provide the mechanic a handy reference thats easy to read, and a 2005 Yamaha Raptor 350 manual that contains comprehensive explanations of all disassembly, assembly, repair, overhaul and inspection operations.
This 2006 Yamaha Raptor 350 factory service manual was prepared using the latest data available at the time of publication. Always clean up spilled fluid immediately. Its recommended to only use the exact tools, as specified in this 2008 Yamaha Raptor 350 manual. Unfortunately due to the nature of this item we are unable to offer refunds on this item. Brake fluid may deteriorate painted surfac- es or plastic parts. This 2004 Yamaha Raptor 350 factory service manual was prepared using the latest data available at the time of publication.
All the torque settings and adjust them as neces- parts and accessories added to this ve- sary. Recommended lubricant: Lithium-soap-based grease Right 1. If electrode erosion becomes ex- cessive, or if carbon and other deposits are excessive, you should replace the spark plug with the specified plug. However, great care was taken to ensure all data in this 2009 Yamaha Raptor 350 manual is technically correct, and this 2009 Yamaha Raptor 350 manual should be considered the only source for sound repair advice. However, enough information in this 2006 Yamaha Raptor 350 manual is given for do-it-yourself mechanics to correctly and safely perform repair work to their 2006 Yamaha Raptor 350 all-terrine-vehicle. Loosen the locknut at the clutch lever. The 2005 Yamaha Raptor 350 mechanic should carefully read and become familiar with the service procedures before beginning work.
Periodic inspection, adjustment and lubrica- tion will keep your machine in the safest and most efficient condition possible. Insert the tailpipe into the muffler and align the bolt holes. The 2004 Yamaha Raptor 350 manual is no different then a factory service manual you'd buy in stores. If the brake pedal is not posi- adjusted brakes. This Yamaha Raptor 350 manual contains a troubleshooting section to logically and systematically search for the source of the Yamaha Raptor 350 problem. This 2005 Yamaha Raptor 350 manual contains a troubleshooting section to logically and systematically search for the source of the 2005 Yamaha Raptor 350 problem. All repair procedures in this 2009 Yamaha Raptor 350 factory service manual are arranged in sequential, step-by-stop order.
Most Improper cleaning of the spark arrester. Most tools if needed can be rented at local or online parts stores. If the fuse immediately blows again, the electrical system which could lead consult a Yamaha dealer. Turning Do not operate at speeds too fast for your the adjusting screw in decreases the top skills or the conditions. Some procedures in this 2005 Yamaha Raptor 350 downloadable manual may require the use of special tools. Otherwise your feet may con- Removing hands from handlebars or tact the rear wheels.